Leonard TM-600-LF-STSTL-EXP Single Drench Shower Valve in Cabinet

Specification.
Inlets 3/4''
Outlet 1''
Minimum Flow(GPM) 3
Maximum Flow(GPM) 58
Overall Width 16''
Overall Height 16''
Overall Depth 8''

Certifications.
ASSE Certified Lead Free
Valve is ASSE 1071 Listed

Options.
Baked White Exposed Cabinet BWE-EXP
Baked White Recessed Cabinet BWE-REC
Chrome Plated Finish CP
Inlet Thermometers IT
Stainless Steel Recessed Cabinet STSTL-REC



Single Drench Shower Valve in Cabinet TM-600-LF-STSTL-EXP

ECO-MIX ™ DURA-trol® solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. DURA-trol® is highly responsive and cannot be damaged by extremes in temperature. Thermostatic Mixing Valve can be set to the correct temperature for the application. Locking temperature regulator to prevent accidental movement set for 85°F (29°C), Recommended Hot Inlet Temperature 140°F. Mixing valve will close down on failure of cold water supply. Mixing valve with special internal cold water bypass capable of 20 GPM (76 l/min) @ 30 PSI (2.1 Bar) upon failure of hot water supply. Adjustable high temperature limit stop * set for 90°F (32°C), Integral wall support, Full 3/4'' bottom or top inlets and 1'' top outlet, View port in door with Dial thermometer (range 0 to 140°F, -10 to 60°C), Rough bronze finish, Exposed stainless steel cabinet with hinged door and cylinder lock, Angle checkstops on inlets

This product provides tepid water per the requirements of ANSI Z358.1

This product is certified to meet Low Lead requirements of wetted surface area containing less than 0.25% lead by weight

Genuine Leonard Valve Product.

Order minimum must be $125 to ship from the factory.
Must meet requirements to ship from factory. Items that ship from the Leonard factory ship within a week and a half to two weeks from order date except when purchasing a special order item. Special order shipping times vary in delivery times.

**Freight charges will apply for all Complete Valve Systems**