Mifab C1200-C Series Isolation (Floating) Floor Cleanout with Adj Cover and Plug

MIFAB-C1200-C Series

MIFAB C1200-C Series (specify top assembly design) adjustable floor cleanout with lacquered cast iron upper body and lower bodies with anchor flanges, secondary “O” ring Test Seal, cast iron membrane clamp rings for waterproofing membrane, neoprene expansion compensator, 4” cleanout opening and scoriated combined cover and plug top assembly (specify material type) with stainless steel vandal proof allen key screws and primary gasket seal.

Used in computer rooms and other areas that have cables and wires underneath a floating floor assembly to provide emergency access to the plumbing lines for removal of blockages. Neoprene expansion compensator provides flexibility with floating floor system. Membrane clamp is bolted onto the anchor flange, securing the waterproof membrane in place. Seepage control is not available since cleanouts must be gas tight. Replacement of the surface level cover/plug with the neoprene gasket glued to the underside provides visual evidence that the cleanout has been properly resealed to prevent harmful sewer gases from entering the building.

-1 Nickel bronze top assembly
-3 Heavy duty stainless steel top assy
-4 Extra heavy duty ductile iron top assy for unfinished areas
-6 Security screws (TR25 Torx & pin)
-6S 6” x 6” square top assy (-1 or -3 only)
-11 Acid resistant epoxy coated body
-13 Galvanized body
-15 Extension
-28 Stainless steel body (Type 304)
-30 PVC socket connection body
-31 ABS socket connection body
-34 Secondary closure plug
-90 Threaded side outlet (2”,3”,4”)(cast iron only)
-90NH No hub side outlet (2”, 3”, 4”)(cast iron only)
-95 Special marking etched into top (SAN for sanitary or GW for Grease Waste)
-ARRA ARRA (Stimulus Act) compliant product
-BA Buy American Act compliant product
-C Membrane clamp
(Standard) No hub outlet
P Push on outlet
-PA Pennsylvania Steel Act compliant product
-R Round top assy
-RC Stainless steel carpet maker
-RCF Stainless steel carpet flange cover (-1 or -3 only)
-S Square top assy (-1 or -3 only) (5” x 5”)
-T Round top assy recessed 1/8” for tile
T Threaded outlet (2”,3”,4”)
-TS Square top assembly recessed 1/8” for tile (-1 or -3 only)
-UR Round top assy recessed 1 1/4” for terrazo (-1 or -3 only)
-US Square top assy recessed 1 1/4” for terrazo (-1 or -3 only)
X Inside caulk outlet
-XR Heavy duty round top assly
-XS Heavy duty square top assy
-Z Extended wide elastomeric flange

**Additional Freight Required on all Drain Shipments**
None available