Zurn Z1186-ST Oil Interceptor Storage Tank

Zurn Z1186-ST
Oil Interceptor Storage Tank Acid Resistant Coated interior and exterior fabricated steel oil interceptor, with bronze cleanout plug and visible double wall trap seal, removable combination pressure equalizing/flow diffusing baffle and sediment bucket, oil drawoff, vent connections, secured gasketed non-skid cover, complete with flow control fitting and left hand integral storage tank. Regularly furnished with inlet and outlet in high position. Note: location of outlet from bottom of interceptor cannot be changed.

100% steel construction coated with acid resistant epoxy
Removable combination pressure equalizing/flow diffusing baffle sediment bucket
Integral storage tank

Additional freight charges apply for all Interceptors.

*REGULARLY FURNISHED UNLESS OTHERWISE SPECIFIED
OPTIONS (Check/specify appropriate options)
Options will incur additional cost

Outlet Size 2'' and 3''
Inlet and outlet sizes shown indicate standard operating sizes and flow control settings. Size #300 and #400 will have 3 [76] connections reduced to 2 [51] as standard. Size #700 and #800 will have 4 [100] connections reduced to 3 [76]as standard. Acid Resistant Coated Fabricated Steel*

PREFIXES
Z Acid Resistant Coated Fabricated Steel*

SUFFIXES
E Acid Resistant Coated interior and exterior fabricated steel section.
       (Specify 'C' Dim. required) for recessed installation
-HD Heavy duty traffic cover rated at 10,000 lbs. maximum safe live load.
-K Anchor flange 1-3/4 [44] down from top and 2 [51] wide. A 3 [76] minimum
       extension height is required when anchor flange
      (-K) option is specified. (Specify 'C' Dim. height required.)
-KC Anchor flange 1-3/4 [44] down from top and 2 [51] wide with clamp collar.
-STR Storage tank on right hand side when facing the inlet.